welding ceramic lining anti wear high temperature adhesive

　　The description of BD400 high temperature abrasion wear resistant welding ceramic lining epoxy adhesive

Performance features of our BD400 welding ceramic lining anti wear abrasion high temperature resistant adhesives:
1.Two component,gray paste,the highest temperature resistant is 320 degree.
2.Regard imported high performance heat resistant resin as main material preparation.
3.Can cure at room temperature,can also heat for curing.
4.The limitation bearing temperature is 350 degree,suggest long term working temperature is under 320 degree
5.The curing product has excellent water&acid&alkali resistance.

Product usage of our BD400 wear abrasion high temperature resistant welding ceramic liner repair compound epoxy adhesive:
Used in the bonding of wear resistant ceramic tile on the equipment of suffering from material erosive wear under
high temperature working condition in electric power,metallurgy, cement, mining and other industries,
or welding the bottom lining and seal of the ceramic,or used in the bonding and sealing between metal and metal,metal and
other inorganic material under other high temperature working condition.

How to use of our BD400 welding ceramic lining high temperature anti wear abrasion resistant epoxy repair adhesives:
1.Surface treatment: Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,
clean it by cleaning agent in the end.

2.Configure adhesives: Make A and B two components mix uniformly according to the specified percentage(1000:15)

3.Using adhesives: Make the mixed-up adhesives spread coating on the surface of adherend uniformly.

4.Curing: Initial curing for 4-5 hours at the room temperature, fully curing for 2-5 days,or heat it up to the temperature of 80℃ and keep this temperature for 2 hours,then heat up to the temperature of
150 degree and keep this temperature for 2 hours for curing, if the time is urgent,can use hot air to cure,it can be fully curing in
half an hour at the temperature of 230 degree,if the product is not in a hurry to install,you had better place it for a period of time
to fully cure naturally.