wear resistant ceramic adhesiv > high temperature epoxy curing agent hardener

high temperature epoxy curing agent hardener

BD12 high temperature resistant epoxy curing agent hardener

Product performance feature:
1. The viscosity is moderate.
2. The adhesion of the adhesive layer is strong, the cohesive strength is high,toughness and close-grained.
3. After mixing with universal epoxy E-51,the heat resistant can reach to 220 deg C.BD12 high temperature high strength epoxy curing
agent is the modified aromatic amines high temperature resistant curing agent,can be curing into common bisphenol A epoxy resin at room temperature,the heat resistant of the cured products after heating up curing of common bisphenol A epoxy resin can reach to 220 deg C,
the strength of the cured products is high,the bonding force is good, usage period is long.

How to use:
The mixing weight ratio:E-51: BD12= 100 : 50
Curing:Surface drying time: 2 hours (at the room temperature of 25 deg C),initial curing time: 6 hours (at room temperature of 25 deg C).

Packaging,transportation and storage:
This product can be packed in iron drum or plastic drum,the net weight of each drum is 20 Kgs or 200 Kgs.
In the process of transportation,it is strictly forbidden to open cover and package damage, pay attention to moistureproof,avoid sunshine
and rain.
This product should be stored in a cool and dry warehouse,the storage period is 12 months.
Exceed the time limit,after passing inspection,it can still be used.

The product performance index of BD12 high temperature resistant epoxy curing agent:

Appearance	Viscosity (25℃) mPa.s Test method:NDJ-1 rotational viscometer,number 4 rotor,6rpm	Density(25℃) g/cm3	freezing point (℃)	amine value mkoh/g	Toxicity LD
Amber Liquid	8000±1000	1.03±0.05	< -10	210-230	> 5000

The product packaging photo of our BD12 high temperature epoxy resin hardener curing agent:

------分隔线----------------------------