• Home
  • About us
  • Certificate
  • Products
  • Cases
  • Cooperation
  • Contact us
  • Media Contact
rubber metal bonding adhesive > BD802 high temperature rubber metal bonding epoxy adhesive

BD802 high temperature rubber metal bonding epoxy adhesive

BD802 high temperature rubber metal bonding epoxy adhesive

BD802 high temperature resistant rubber metal bonding repair compound epoxy adhesive

Product description of our BD802 metal rubber high temperature resistant epoxy compound bonding adhesives:
Two-component,black viscous liquid,the highest temperature resistance is 150 degree.The curing is flexible,
suitable for the self-adhesion and each-adhesion between rubber,leather,conveyor belt, metal, ceramics and wood,
also used in the paste of wear resistant ceramic rubber lining under the high temperature working condition.
The peel strength of rubber-rubber is 110N/2.5cm,the peel strength of metal-rubber is 28N/2.5cm.
 
How to use of our BD802 high temperature rubber metal epoxy repair compound adhesive:
1.Matting on the surface of rubber,polishing rough on the metal surface to reveal the fresh substrates,
and clean it by cleaning agent(such as: ethyl acetate, acetone, alcohol, etc),dry it by airing.                 
 
2.After making main agent(A component) and curing agent(B component) mix uniformly according to ratio 10:1,
use hair brush to brush coating on the surface of metal and rubber separately for twice.When the adhesive solution 
dry to have viscous force sense for the first time(use hand to touch like sticky inviscid),then brush coating for the second time,
after the adhesive solution of the second time drying to have viscous force sense(use hand to touch like sticky inviscid),
can make the rubber be bonding on the metal surface at this time,then compress it to be compacted
(generally knock it from the middle to all around with rubber hammer).Can’t do bank and forth movement after compaction.
 
3.Curing for 48 hours at the normal temperature can reach to the largest strength.
 
Notes: 
1.This product contains organic solvent,should pay attention to ventilation during storage and using.
 
2.The adhesive should be matched between configuration and using,the configured adhesive should be used up within 
1 hours,can’t place for a long time.
 
Storage:
The product storage period is 12 months at the temperature of 25 degree.
 
product specification:
Two component,1Kg/group,A component: 910g,packed in a iron drum,B component:90g,packed in a iron bottle.
 
 Product packaging photo of BD802 abrasion wear high temperature resistant metal rubber epoxy bonding adhesive:

 
 
 
                                        
                                         
                                           
 
 

------·ΦΈτΟί----------------------------
abrasion wear
resistant coating
crusher backing
compound
anti corrosion
resistant coating
slurry pump
repair coating
industrial ceramic
epoxy adhesive
rubber liquid
coating
thermal heat
insulation coating
skid resistant
coating
heat conduction
coating
thermal conductive
adhesive
high temperature
resistant adhesive
high strength
structural adhesive
industrial repair
agent
rubber metal
bonding adhesive
elastic flexible
adhesive
high temperature
anti seizure compound
high temperature seize
resistant agent
bearing anti wear
fastening adhesive

CEO Email: jimmy@realbond.net        Tel:86-0710-3122805        Fax:86-0710-3618337